




Front Brake Disc Pad Set for Hyundai i10 (2007-2013) | RANE
Hyundai i10 Front Brake Disc Pad Set | 2007-2013 | RANE
SKU: RBL/DP/001 R812M
Restore confident performance with this Hyundai i10 Front Brake Disc Pad Set from our Front Brake Pads range, engineered to OEM fit for reliable operation and long-lasting durability — built to handle Indian roads, traffic and weather.
What Does This Part Do?
Brake pads are the friction component of your disc brakes. When you press the brake pedal, the caliper squeezes the pads against the rotating brake disc — the friction slows the wheel and turns the car's motion into heat. A fresh set delivers consistent bite, a firm pedal feel and stable stopping in wet and dry conditions.
How to Use This Product
Replace your front brake pad set if your Hyundai i10 shows any of these signs, then fit and use it as described below:
- Squealing, grinding or scraping noise when braking
- Longer stopping distance or a soft, spongy brake pedal
- Brake warning light on the dashboard or thin pads visible through the wheel
- Vibration or pulling to one side under braking
Fitting Steps
- Confirm the SKU and the compatibility table match your Hyundai i10 variant and year
- Loosen the wheel nuts, lift the car, secure it on axle stands and remove the front wheels
- Remove the caliper guide bolts, lift off the caliper and take out the worn pads — support the caliper, never hang it by the brake hose
- Clean the caliper bracket, lightly grease the contact points and slide in the new pads with the supplied shims and clips
- Retract the caliper piston, refit the caliper and tighten the bolts to the manufacturer's torque
- Pump the brake pedal until it feels firm, then bed in the pads with gentle stops over the first 200 km
Why Choose RANE?
RANE is an established Indian supplier of steering and suspension systems to leading automakers — bringing that OE-level engineering to the aftermarket for dependable fitment and long service life.
Key Features
- Exact OEM fit for Hyundai i10
- Friction material designed for consistent, quiet braking
- Stable stopping performance in wet and dry conditions
- Supplied as a set for one front axle
- Designed for Indian traffic, heat and humidity
- Restores firm pedal feel and confident stopping
Compatible Vehicles - Hyundai i10 (2007-2013)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| I10 1st Gen | 1.1L (G4HG) | Petrol | 2007 | 2010 |
| I10 1st Gen | 1.2L (G4LA) | Petrol | 2008 | 2010 |
| I10 1st Gen F/L | 1.1L (G4HG) | Petrol | 2010 | 2013 |
| I10 1st Gen F/L | 1.2L (G4LA) | Petrol | 2010 | 2013 |
| I10 1st Gen F/L | 1.1L (G4HG) | Petrol/LPG | 2010 | 2013 |
Installation Notes
- Professional installation recommended
- Inspect the Rear Brake Pads and Front Brake Disc for wear during installation
- Check the Brake Fluid and replace it if worn
- Follow manufacturer torque specifications
- Replace pads as a complete axle set and avoid hard braking for the first 200 km while they bed in
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 7 days of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM


