Front Stabilizer Link Set for Maruti Celerio, Ciaz & More (2007-2021) | SMIC Autoparts
Rs. 1,217.00
In Stock
Add to cart
Sold out
Front Stabilizer Link Set for Maruti Celerio, Ciaz & More (2007-2021) | SMIC Autoparts
Rs. 1,217.00
Shipping Calculated
At Checkout
100% Original
And Quality
GST Bill
Included
Description
Maruti Celerio, Ciaz & More Front Stabilizer Link Set | 2007-2021 | SMIC Autoparts
SKU: MAF9075
Restore confident performance with this Maruti Celerio, Ciaz and more compatible models Front Stabilizer Link Set from our Stabilizer link range, engineered to OEM fit for reliable operation and long-lasting durability — built to handle Indian roads, traffic and weather.
What Does This Part Do?
The stabilizer (anti-roll bar) link connects the anti-roll bar to the suspension strut or lower arm. It transfers force across the axle to reduce body roll while cornering, keeping the car flat, stable and confident.
How to Use This Product
Replace your stabilizer link if your Maruti Celerio, Ciaz and more compatible models shows any of these signs, then fit and use it as described below:
- Rattling or clunking noise over bumps and speed breakers
- Excessive body roll when cornering
- Loose or vague steering feel at low speeds
- Torn rubber boots or worn ball ends on the link
Fitting Steps
- Confirm the SKU and the compatibility table match your Maruti Celerio, Ciaz and more compatible models variant and year
- Loosen the wheel nuts, lift the vehicle, support it on axle stands and remove the wheel if access is needed
- Unbolt the old link from the anti-roll bar and the strut or lower arm, holding the stud with a spanner or hex key
- Fit the new link with the supplied nuts and washers, keeping the boots in position
- Lower the vehicle and tighten the fasteners to the manufacturer's torque at normal ride height
- Take a short test drive over uneven road to confirm the noise is gone
Why Choose SMIC Autoparts?
SMIC Autoparts is an Indian aftermarket brand of steering and suspension parts for a wide range of passenger vehicles, built for dependable fit and everyday durability.
Key Features
- Exact OEM fit for Maruti Celerio, Ciaz and more compatible models
- Precision ball ends for smooth, quiet movement
- Protective boots keep dirt and water out
- Reduces body roll and suspension rattles
- Improves cornering stability and confidence
- Designed for Indian road conditions
Compatible Vehicles - Maruti Celerio, Ciaz & More (2007-2021)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| Celerio 1st Gen | 1L (K10B) | Petrol | 2013 | 2017 |
| Celerio 1st Gen | 1L (K10B) | Petrol/CNG | 2013 | 2017 |
| Celerio 1st Gen | 0.8L (E08A) | Diesel | 2015 | 2017 |
| Celerio 1st Gen | 1L (K10B) | Petrol | 2015 | 2017 |
| Celerio 1st Gen F/L | 1L (K10B) | Petrol | 2017 | 2020 |
| Celerio 1st Gen F/L | 1L (K10B) | Petrol/CNG | 2017 | 2020 |
| Celerio 1st Gen F/L | 1L (K10B) | Petrol | 2020 | 2021 |
| Celerio 1st Gen F/L | 1L (K10B) | Petrol/CNG | 2020 | 2021 |
| Ciaz 1st Gen | 1.3L (D13A) | Diesel | 2014 | 2015 |
| Ciaz 1st Gen | 1.4L (K14B) | Petrol | 2014 | 2018 |
| Ciaz 1st Gen | 1.3L (D13A) | Diesel | 2015 | 2018 |
| S-Cross 1st Gen | 1.3L (D13A) | Diesel | 2015 | 2017 |
| S-Cross 1st Gen | 1.6L (D16A) | Diesel | 2015 | 2017 |
| S-Cross 1st Gen F/L | 1.3L (D13A) | Diesel | 2017 | 2020 |
| Swift 2nd Gen | 1.3L (D13A) | Diesel | 2011 | 2013 |
| Swift 2nd Gen | 1.2L (K12M) | Petrol | 2011 | 2013 |
| Swift 2nd Gen | 1.3L (D13A) | Diesel | 2013 | 2014 |
| Swift 2nd Gen | 1.2L (K12M) | Petrol | 2013 | 2014 |
| Swift 2nd Gen F/L | 1.3L (D13A) | Diesel | 2014 | 2016 |
| Swift 2nd Gen F/L | 1.2L (K12M) | Petrol | 2014 | 2016 |
| Swift Dzire 2nd Gen | 1.2L (K12M) | Petrol | 2012 | 2013 |
| Swift Dzire 2nd Gen | 1.3L (D13A) | Diesel | 2012 | 2013 |
| Swift Dzire 2nd Gen | 1.2L (K12M) | Petrol | 2013 | 2015 |
| Swift Dzire 2nd Gen | 1.3L (D13A) | Diesel | 2013 | 2015 |
| Swift Dzire 2nd Gen F/L | 1.2L (K12M) | Petrol | 2015 | 2016 |
| Swift Dzire 2nd Gen F/L | 1.3L (D13A) | Diesel | 2015 | 2016 |
| SX4 1st Gen | 1.6L (M16A) | Petrol | 2007 | 2008 |
| SX4 1st Gen | 1.3L (D13A) | Diesel | 2009 | 2013 |
| SX4 1st Gen | 1.6L (M16A) | Petrol/CNG | 2009 | 2013 |
| SX4 1st Gen | 1.6L (M16A) | Petrol | 2009 | 2013 |
| SX4 1st Gen | 1.6L (M16A) | Petrol/CNG | 2010 | 2013 |
Installation Notes
- Professional installation recommended
- Inspect the Ball Joint and Control Arm for wear during installation
- Check the Tie Rod End and replace it if worn
- Follow manufacturer torque specifications
- Replace links on both sides together and tighten them at normal ride height
Technical Specifications
SKU / Part No.
MAF9075
Brand
SMIC Autoparts
Seller
BKS Motors
Length
36.5 cm
Width
8.5 cm
Height
5 cm
Weight
0.74 kg
Manufacturer
Sona Mandhira Private Limited
Country of Origin
India
Shipping and Refund
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 7 days of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM
