Honda WR-V Front Strut Assembly (Left) | 2017-2026 | MONROE
Rs. 2,681.00
In Stock
Add to cart
Sold out
Honda WR-V Front Strut Assembly (Left) | 2017-2026 | MONROE
Rs. 2,681.00
Shipping Calculated
At Checkout
100% Original
And Quality
GST Bill
Included
Description
HONDA WR-V FRONT STRUT ASSEMBLY (LEFT) | 2017-2026 | MONROE
SKU: M2N3G7777
Bring back stable handling and a comfortable ride on your Honda WR-V with this left-hand Front Suspension Strut Assembly, engineered to OEM specifications by MONROE for a precise fit, reliable performance and long service life on Indian roads.
What Does This Part Do?
The strut assembly combines the shock absorber and the suspension mounting into one load-bearing unit. It supports the weight of the vehicle, absorbs road impacts and holds the wheel alignment in place, so the car rides smoothly and steers precisely.
When You Need This Part
Over time, wear, heat, dust and rough roads take their toll. Common signs that this part needs replacing include:
- Knocking or rattling noise from the front over bumps
- Vehicle sagging or sitting lower on one side
- Oil leaking from the strut body
- Vague steering, wandering or poor wheel alignment
- Excessive bouncing, nose-diving or body roll
If your Honda WR-V shows any of these symptoms, replacing the front strut assembly is the permanent fix. It is also a good time to check the Shock Absorber Mount and Shock Absorber Bearing.
How to Use This Product
- Raise the vehicle safely and support it on axle stands; remove the wheel
- Unbolt the old unit from the mounting points (compress the coil spring with a proper spring compressor where applicable)
- Transfer or replace the top mount, boot and bump stop as required
- Fit the new unit, tighten all fasteners to the manufacturer's torque specification and refit the wheel
- Lower the vehicle, take a short test drive and get a wheel alignment check
Why Choose MONROE?
Part of the Tenneco group, MONROE is one of the world's best-known ride-control brands, with more than a century of experience engineering shock absorbers and struts for carmakers and the aftermarket. Every unit is built to restore factory ride comfort, stability and safety.
Key Features
- Exact OEM fit with direct bolt-on installation
- Restores factory ride height, comfort and handling
- Robust, load-bearing strut body
- Corrosion-resistant finish and leak-proof sealing
- Tuned for Indian roads, potholes and speed breakers
Compatible Vehicles - HONDA (2017-2026)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| WR-V 1.5L S MT | 1.5L N15A1 | Diesel | 2017 | 2020 |
| WR-V 1.2L S MT | 1.2L L12B4 | Petrol | 2017 | 2020 |
| WR-V 1.2L VX MT | 1.2L L12B4 | Petrol | 2017 | 2020 |
| WR-V 1.5L VX MT | 1.5L N15A1 | Diesel | 2017 | 2020 |
| WR-V 1.2L S MT | 1.2L L12B4 | Petrol | 2019 | 2020 |
| WR-V 1.2L VX MT | 1.2L L12B4 | Petrol | 2019 | 2020 |
| WR-V 1.5L S MT | 1.5L N15A1 | Diesel | 2019 | 2020 |
| WR-V 1.5L V MT | 1.5L N15A1 | Diesel | 2019 | 2020 |
| WR-V 1.5L VX MT | 1.5L N15A1 | Diesel | 2019 | 2020 |
| WR-V F/L 1.2L SV MT | 1.2L i-VTEC | Petrol | 2020 | 2026 |
| WR-V F/L 1.2L VX MT | 1.2L i-VTEC | Petrol | 2020 | 2026 |
| WR-V F/L 1.5L SV MT | 1.5L i-DTEC | Diesel | 2020 | 2026 |
| WR-V F/L 1.5L VX MT | 1.5L i-DTEC | Diesel | 2020 | 2026 |
Installation Notes
- Professional installation recommended
- Replace in pairs (both left and right) for balanced handling
- Inspect mounts, boots, bump stops and springs during installation
- Follow manufacturer torque specifications
- Get a wheel alignment done after strut replacement
- Pair with a new Stabilizer link if the old one shows wear
Technical Specifications
SKU / Part No.
M2N3G7777
Brand
MONROE
Seller
BKS Motors
Length
58 cm
Width
18 cm
Height
18 cm
Weight
4.5 kg
Manufacturer
Tenneco Automotive India Private Limited
Country of Origin
India
Shipping and Refund
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 24 hours of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
A return request can be raised within 24 hours of receiving the product from us.
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM