Maruti Alto 800 HVAC Control Unit | 2020-2023 | KARTION
Rs. 1,780.00
In Stock
Add to cart
Sold out
Maruti Alto 800 HVAC Control Unit | 2020-2023 | KARTION
Rs. 1,780.00
Shipping Calculated
At Checkout
100% Original
And Quality
GST Bill
Included
Description
MARUTI ALTO 800 HVAC CONTROL UNIT | 2020-2023 | KARTION
SKU: 74400M67P00-B1WKP
Restore ice-cold cabin cooling with this Maruti Alto 800 HVAC Control Unit, a precision-engineered AC Control Unit replacement built to OEM specifications for reliable performance, perfect fitment and long-lasting durability — made to handle Indian traffic, heat, dust and road conditions.
What Does This Part Do?
The hvac control unit on your Maruti Alto 800 lets you set temperature, fan speed and airflow mode for the AC and heater.
When You Need This Part
With age, heat, dust and daily use, this part can wear out or get damaged — leading to common issues like:
- AC blowing warm or weak air
- Refrigerant leaking repeatedly after a top-up
- Unusual noise when the AC is switched on
- AC cooling slowly or cutting off
- Musty smell or water leaks from the HVAC unit
If your Maruti Alto 800 shows any of these symptoms, replacing the hvac control unit is the permanent fix — and a good time to inspect the Blower Motor as well.
How To Use This Product
- Have the AC refrigerant recovered by a qualified technician
- Remove the old part and cap open lines to keep moisture out
- Fit the new part with new O-rings lubricated with compressor oil
- Replace the receiver drier, vacuum the system and recharge to specification
- Check cooling, pressures and leaks after recharge
Why Choose KARTION?
KARTION, marketed by BKS Motors Private Limited, supplies OEM-grade aftermarket spare parts engineered to factory specifications — every part is quality-checked for fit, finish and durability, so you get dependable performance at an honest price, delivered across India by Auto Best Fixit.
Key Features
- Exact OEM fit and performance
- High-grade materials for efficient heat exchange
- Leak-tested, corrosion-resistant construction
- Compatible with R134a / R1234yf systems as per vehicle
- Built for Indian heat and humidity
- Faster cabin cooling, lower compressor load
Compatible Vehicles - MARUTI ALTO 800 (2020-2023)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| Alto 800 (1st Gen Facelift) | 0.8L LXI GREEN MT (TYPE 3) | Petrol/CNG | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L LXI MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L LXI(O) GREEN MT (TYPE 3) | Petrol/CNG | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L LXI(O) MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L STD MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L STD(O) MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L TOUR H1 GREEN MT (TYPE 3) | Petrol/CNG | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L TOUR H1 MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L TOUR H1(O) GREEN MT (TYPE 3) | Petrol/CNG | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L TOUR H1(O) MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L VXI MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L VXI(O) MT (TYPE 3) | Petrol | 2020 | 2023 |
| Alto 800 (1st Gen Facelift) | 0.8L VXI+ MT (TYPE 3) | Petrol | 2020 | 2023 |
Installation Notes
- Professional installation recommended
- Replace the receiver drier/filter and vacuum the system before recharging
- Perform a nitrogen leak test after installation
- Follow manufacturer torque specifications
- Recharge refrigerant only after confirming there are no leaks
- Check the Air Vent during installation and replace if worn
Technical Specifications
SKU / Part No.
74400M67P00-B1WKP
Brand
KARTION
Seller
BKS Motors
Length
25 cm
Width
15 cm
Height
10 cm
Weight
0.6 kg
Manufacturer
Marketing by : BKS Motors Private Limited
Country of Origin
INDIA
Shipping and Refund
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 24 hours of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
A return request can be raised within 24 hours of receiving the product from us.
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM