Maruti Suzuki Ciaz, Ritz Wheel Brake Cylinder Repair Kit | 2009-2018 | BOSCH
Rs. 67.00
In Stock
Add to cart
Sold out
Maruti Suzuki Ciaz, Ritz Wheel Brake Cylinder Repair Kit | 2009-2018 | BOSCH
Rs. 67.00
Shipping Calculated
At Checkout
100% Original
And Quality
GST Bill
Included
Description
MARUTI SUZUKI CIAZ, RITZ WHEEL BRAKE CYLINDER REPAIR KIT | 2009-2018 | BOSCH
SKU: 0986AB7594
Stop brake fluid leaks and restore even braking with this genuine BOSCH Wheel Brake Cylinder Repair Kit for the Maruti Suzuki Ciaz, Ritz. Part of our Brake Repair Kit range, it is precision-engineered to OEM specifications for reliable performance, a perfect fit and long-lasting durability — built to handle Indian traffic, heat and dust.
What Does This Part Do?
This kit contains the piston cups, dust boots and seals for your vehicle's wheel brake cylinder. The wheel cylinder pushes the brake shoes against the drum; when its cups wear out, brake fluid leaks into the drum and braking weakens.
When You Need This Part
Over time, wear, heat and contamination take their toll, leading to common issues like:
- Brake fluid leaking at the back of the wheel or inside the drum
- Brake fluid level dropping
- Spongy brake pedal
- Brake shoes contaminated with fluid
- Uneven braking or vehicle pulling to one side
If your Maruti Suzuki Ciaz, Ritz shows any of these symptoms, worn wheel cylinder cups are the usual cause — an overhaul with this kit restores leak-free, even braking.
Why Choose BOSCH?
A global leader in automotive braking technology, BOSCH supplies OEM braking components to leading car makers worldwide — bringing the same engineering precision, strict quality testing and dependable fit to every aftermarket part.
Key Features
- Exact OEM-spec seals, cups and boots
- High-grade rubber compatible with DOT 3 / DOT 4 brake fluid
- Heat and swell-resistant compound
- Complete kit for a full overhaul
- Cost-effective alternative to replacing the complete unit
- Designed for Indian road and climate conditions
How To Use This Product
- Remove the drum and brake shoes to access the wheel cylinder
- Dismantle the cylinder and check the bore for scoring
- Clean with fresh brake fluid and fit the new cups and boots lubricated with brake fluid
- Reassemble, refit the shoes and drum, and adjust
- Bleed the brakes and test before driving
Compatible Vehicles - MARUTI SUZUKI (2009-2018)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| CIAZ 1ST GEN 1.3L VDI MT | 1.3L (D13A) | Diesel | 2014 | 2015 |
| CIAZ 1ST GEN 1.4L VXI MT | 1.4L (K14B) | Petrol | 2014 | 2018 |
| CIAZ 1ST GEN 1.4L VXI AT | 1.4L (K14B) | Petrol | 2014 | 2018 |
| CIAZ 1ST GEN 1.3L ZDI MT | 1.3L (D13A) | Diesel | 2014 | 2015 |
| CIAZ 1ST GEN 1.4L ZXI AT | 1.4L (K14B) | Petrol | 2014 | 2018 |
| CIAZ 1ST GEN 1.4L ZXI MT | 1.4L (K14B) | Petrol | 2014 | 2018 |
| CIAZ 1ST GEN 1.3L VDI MT | 1.3L (D13A) | Diesel | 2015 | 2018 |
| CIAZ 1ST GEN 1.3L ZDI MT | 1.3L (D13A) | Diesel | 2015 | 2018 |
| RITZ 1ST GEN 1.3L LDI MT (TYPE 1) | 1.3L (D13A) | Diesel | 2009 | 2012 |
| RITZ 1ST GEN 1.3L VDI MT (TYPE 1) | 1.3L (D13A) | Diesel | 2009 | 2012 |
| RITZ 1ST GEN 1.3L VDI ABS MT (TYPE 1) | 1.3L (D13A) | Diesel | 2009 | 2012 |
| RITZ 1ST GEN 1.2L LXI MT (TYPE 1) | 1.2L (K12M) | Petrol | 2009 | 2012 |
| RITZ 1ST GEN 1.2L VXI MT (TYPE 1) | 1.2L (K12M) | Petrol | 2009 | 2012 |
| RITZ 1ST GEN 1.2L VXI ABS MT (TYPE 1) | 1.2L (K12M) | Petrol | 2009 | 2012 |
| RITZ 1ST GEN 1.2L ZXI MT (TYPE 1) | 1.2L (K12M) | Petrol | 2009 | 2012 |
| RITZ 1ST GEN F/L 1.3L LDI MT (TYPE 2) | 1.3L (D13A) | Diesel | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.2L LXI MT (TYPE 2) | 1.2L (K12M) | Petrol | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.3L VDI MT (TYPE 2) | 1.3L (D13A) | Diesel | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.3L VDI ABS MT (TYPE 2) | 1.3L (D13A) | Diesel | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.2L VXI MT (TYPE 2) | 1.2L (K12M) | Petrol | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.2L VXI ABS MT (TYPE 2) | 1.2L (K12M) | Petrol | 2012 | 2017 |
| RITZ 1ST GEN F/L 1.2L ZXI MT (TYPE 2) | 1.2L (K12M) | Petrol | 2012 | 2017 |
Installation Notes
- Professional installation recommended
- Replace any fluid-contaminated Brake Shoes
- Use only fresh Brake Fluid
- Bleed the brake system after the job
- Overhaul both wheels on the same axle
Technical Specifications
SKU / Part No.
0986AB7594
Brand
BOSCH
Seller
BKS Motors
Length
12 cm
Width
9 cm
Height
4 cm
Weight
1.0 kg
Manufacturer
Bosch Limited
Country of Origin
INDIA
Shipping and Refund
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 24 hours of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
A return request can be raised within 24 hours of receiving the product from us.
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM