Suspension Ball Joint Kit for Mahindra Bolero (2004-2020) | RANE
Rs. 3,427.00
In Stock
Add to cart
Sold out
Suspension Ball Joint Kit for Mahindra Bolero (2004-2020) | RANE
Rs. 3,427.00
Shipping Calculated
At Checkout
100% Original
And Quality
GST Bill
Included
Description
Mahindra Bolero Suspension Ball Joint Kit | 2004-2020 | RANE
SKU: 122049552
Restore confident performance with this Mahindra Bolero Suspension Ball Joint Kit from our Ball Joint range, engineered to OEM fit for reliable operation and long-lasting durability — built to handle Indian roads, traffic and weather.
What Does This Part Do?
The suspension ball joint is the pivot that connects the control arm to the steering knuckle. Its ball-and-socket design lets the wheel move up and down over bumps while still turning left and right for steering, keeping the tyre planted on the road.
How to Use This Product
Replace your suspension ball joint if your Mahindra Bolero shows any of these signs, then fit and use it as described below:
- Clunking or knocking noise from the front suspension over bumps
- Loose or wandering steering and poor straight-line stability
- Uneven or rapid tyre wear on the inner or outer edge
- Vibration through the steering wheel or floor
- Torn dust boot or grease leaking from the joint
Fitting Steps
- Confirm the SKU and the compatibility table match your Mahindra Bolero variant and year
- Loosen the wheel nuts, lift the vehicle, support it on axle stands and remove the wheel
- Disconnect the old joint from the steering knuckle and control arm using a ball-joint separator or press
- Clean the mounting faces, fit the new ball joint and hand-tighten the nuts and bolts
- Refit the wheel, lower the vehicle and tighten all fasteners to the manufacturer's torque
- Get a wheel alignment done before regular driving
Why Choose RANE?
RANE is an established Indian supplier of steering and suspension systems to leading automakers — bringing that OE-level engineering to the aftermarket for dependable fitment and long service life.
Key Features
- Exact OEM fit and articulation for Mahindra Bolero
- Precision-machined steel ball stud for smooth, controlled movement
- Protective dust boot keeps dirt and water out
- Restores steering precision and ride comfort
- Reduces knocking and clunking over bad roads
- Designed for Indian road conditions
Compatible Vehicles - Mahindra Bolero (2004-2020)
| Model | Engine Type | Fuel | Start Year | End Year |
|---|---|---|---|---|
| Bolero 1st Gen | 2.5L (MDI 3200) | Diesel | 2004 | 2007 |
| Bolero 1st Gen | 2.5L (XD3P) | Diesel | 2005 | 2007 |
| Bolero 1st Gen | 2.5L (MDI 3200) | Diesel | 2005 | 2007 |
| Bolero 1st Gen | 2.5L (MDI TC 3200 GEAR DRIVE) | Diesel | 2005 | 2007 |
| Bolero 1st Gen | 2.5L (MDI TC 3200) | Diesel | 2006 | 2011 |
| Bolero 1st Gen | 2.5L (XD3P) | Diesel | 2006 | 2011 |
| Bolero 1st Gen | 2.5L (MDI TC 3200) | Diesel | 2006 | 2012 |
| Bolero 1st Gen | 2.5L (MDI TC 3200 GEAR DRIVE) | Diesel | 2007 | 2011 |
| Bolero 1st Gen | 2.5L (MDI TC 3200) | Diesel | 2007 | 2011 |
| Bolero 2nd Gen | 2.5L (m2DiCR) | Diesel | 2011 | 2016 |
| Bolero 2nd Gen | 2.5L (MDI TC 3200) | Diesel | 2011 | 2016 |
| Bolero 2nd Gen | 2.5L (2.5L NEF) | Diesel | 2012 | 2016 |
| Bolero 2nd Gen | 1.5L (mHawk D70) | Diesel | 2016 | 2020 |
Installation Notes
- Professional installation recommended
- Inspect the Control Arm and Tie Rod End for wear during installation
- Check the Stabilizer link and replace it if worn
- Follow manufacturer torque specifications
- Get a wheel alignment after fitting and replace joints on both sides for balanced handling
Technical Specifications
SKU / Part No.
122049552
Brand
RANE
Seller
BKS Motors
Length
18 cm
Width
17 cm
Height
12 cm
Weight
1.9 kg
Manufacturer
Rane Corporate Centre
Country of Origin
India
Shipping and Refund
Return & Refund Policy
This document is an electronic record in accordance with the Information Technology Act, 2000, and applicable rules made thereunder. This Return & Refund Policy governs the return, replacement, and refund of products purchased from https://autobestfixit.com/.
At AutoBest Fixit, customer satisfaction is important to us. If you receive a damaged, defective, incorrect, or incomplete product, you may request a return or replacement as per the terms below.
Return Eligibility
You may request a return or replacement within 7 days of delivery if:
-
You received the wrong product
-
The product is damaged or defective
-
The item was damaged during transit
-
Parts or accessories are missing
-
The product is significantly different from the description shown on the website
To be eligible for a return:
-
The product must be unused and uninstalled
-
The product should be returned in its original packaging with tags, labels, and accessories
-
Proof of purchase/invoice is required
-
Clear images or videos may be requested for verification
Non-Returnable Items
The following items may not be eligible for return or refund:
-
Products damaged due to improper installation or misuse
-
Products showing physical damage after use
-
Consumable items once opened or used
-
Electrical/electronic components after installation
-
Products returned without original packaging or invoice
Wrong Product or Compatibility Issues
Customers are advised to verify vehicle compatibility and part numbers before placing an order. If you need assistance, our support team will help verify compatibility before purchase.
Returns for compatibility-related issues may be reviewed on a case-by-case basis depending on product condition and vendor approval.
Return Process
To initiate a return:
-
Email us at support.autobestfixit@gmail.com
-
Call or WhatsApp us at +91 9999990622
-
Share your order number and reason for return along with supporting photos/videos if applicable
Our team will review the request within 2 business days and provide return instructions if approved.
Refunds
Once the returned product is received and inspected, refunds will be processed to the original payment method.
Estimated refund timelines:
-
UPI / Wallets: 3–5 business days
-
Debit/Credit Cards: 5–7 business days
-
Net Banking: 5–7 business days
-
COD Orders: Bank transfer within 7 business days
Replacement
If a replacement product is available, it will be shipped after approval of the return request. If replacement is unavailable, a refund will be issued.
Order Cancellation
Orders may be cancelled before dispatch by contacting our support team. Once dispatched, cancellation requests will be handled as per this Return & Refund Policy.
Contact Us
AutoBest Fixit
C-4, 1st Floor, Ring Road, Rajouri Garden, New Delhi – 110027
Phone: +91 9999990622
Email: support.autobestfixit@gmail.com
Business Hours: Monday to Friday, 10:00 AM – 5:00 PM